DVI-I Single Link Cable

Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. Data is transmitted using the transition minimized differential signaling (TMDS) protocol, providing a digital signal from the PC's graphics subsystem to the display.
Cables4sure Premium DVI cables offer the highest quality digital picture. Cables4sure DVI I cables are fully HDCP-compliant. Cables4sure DVI cables meet all DVI specification and are made as well if not better than those for 100’s of Dollars.

Connectors: DVI-I 23-pin Male to DVI-I 23-pin Male
Single link digital signaling allows for high speed transmission up to 4.95Gbps
Shielded undermold protects against unwanted EMI/RFI interference
Gold-plated contacts provide full conductivity with no data loss
Supports hot plugging of DVI display devices
PC and Mac compatible
Resolutions up to 1600 x 1200
Supports digital and analog signals
Compatible with flat panel displays, digital CRT displays, projectors
DVI-I plug connector can only be inserted into a DVI-I interface
Meets DVI DDWG Standard
Not sure which cable to use?
Check both of the female DVI plugs and look for a label, or check the product documentation to make sure you now what type it is.

Single Link or Dual Link?

Single link cables use one TMDS 165 MHz transmitter, while dual links use two. The dual link effectively doubles the power of transmission and provides an increase of speed and signal quality.  Single Link cable is good as a Dual Link cable, for single link product which covers almost 100% of today equipment. Dual link cable should have no negative effects when used with single link equipment.
Single Link: maximum resolution: 1600 x 1200
                  maximum bandwidth: 165 MHz
Dual Link:   maximum resolution: 2048 x 1536
                  maximum bandwidth: 330 MHz

DVI-I, DVI-D or DVI-A?
-DVI-A (Analog) format is used to carry a DVI signal to an analog display
-DVI-D (Digital) format is used for direct digital connection between source video and digital monitor. This provides a faster, higher-quality image than with analog, because digital format DVI-D eliminates the analog conversion process and improves the connection between source and display.
-DVI-I (Intergraded) combination of DVI-D and DVI-A cables within one cable. DVI-I contains both the digital and analog connections. DVI-I cable cannot connect a Digital output to an analog input or Digital input to an Analog output.

Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV.
DVI-I cable can carry both signals Digital and Analog.
Note: DVI-I cable cannot connect a Digital output to an analog input or Digital input to an Analog output

Dual or Single Link?

Single Link: maximum resolution: 1600 x 1200
                maximum bandwith: 165 Mhz

Dual Link:   maximum resolution: 2048 x 1536
                maximum bandwith: 330 Mhz

If you are not sure which link you need. The Dual Link will work where the Single Link may not.

Product ID: 233002-25CM